मोड्युल:Wd
Documentation for this module may be created at मोड्युल:Wd/doc
-- Original module located at [[:en:Module:Wd]], [[:en:Module:Wd/i18n]] and [[:en:Module:Wd/aliasesP]].
local p = {}
local arg = ...
local i18n
function loadSubmodules(frame)
local title
if frame then
-- current module invoked by page/template, get its title from frame
title = frame:getTitle()
else
-- current module included by other module, get its title from ...
title = arg
end
i18n = i18n or require(title .. "/i18n")
p.aliasesP = p.aliasesP or mw.loadData(title .. "/aliasesP")
end
p.claimCommands = {
property = "property",
properties = "properties",
qualifier = "qualifier",
qualifiers = "qualifiers",
reference = "reference",
references = "references"
}
p.generalCommands = {
label = "label",
title = "title",
alias = "alias",
aliases = "aliases",
badge = "badge",
badges = "badges"
}
p.flags = {
linked = "linked",
short = "short",
raw = "raw",
multilanguage = "multilanguage",
unit = "unit",
-------------
preferred = "preferred",
normal = "normal",
deprecated = "deprecated",
best = "best",
future = "future",
current = "current",
former = "former",
edit = "edit",
editAtEnd = "edit@end",
mdy = "mdy",
single = "single",
sourced = "sourced"
}
p.args = {
eid = "eid"
}
local aliasesQ = {
percentage = "Q11229",
prolepticJulianCalendar = "Q1985786",
citeWeb = "Q5637226",
citeQ = "Q22321052"
}
local parameters = {
property = "%p",
qualifier = "%q",
reference = "%r",
alias = "%a",
badge = "%b",
separator = "%s",
general = "%x"
}
local formats = {
property = "%p[%s][%r]",
qualifier = "%q[%s][%r]",
reference = "%r",
propertyWithQualifier = "%p[ <span style=\"font-size:85%\">(%q)</span>][%s][%r]",
alias = "%a[%s]",
badge = "%b[%s]"
}
local hookNames = { -- {level_1, level_2}
[parameters.property] = {"getProperty"},
[parameters.reference] = {"getReferences", "getReference"},
[parameters.qualifier] = {"getAllQualifiers"},
[parameters.qualifier.."\\d"] = {"getQualifiers", "getQualifier"},
[parameters.alias] = {"getAlias"},
[parameters.badge] = {"getBadge"}
}
-- default value objects, should NOT be mutated but instead copied
local defaultSeparators = {
["sep"] = {" "},
["sep%s"] = {","},
["sep%q"] = {"; "},
["sep%q\\d"] = {", "},
["sep%r"] = nil, -- none
["punc"] = nil -- none
}
local rankTable = {
["preferred"] = 1,
["normal"] = 2,
["deprecated"] = 3
}
local Config = {}
Config.__index = Config
-- allows for recursive calls
function Config.new()
local cfg = {}
setmetatable(cfg, Config)
cfg.separators = {
-- single value objects wrapped in arrays so that we can pass by reference
["sep"] = {copyTable(defaultSeparators["sep"])},
["sep%s"] = {copyTable(defaultSeparators["sep%s"])},
["sep%q"] = {copyTable(defaultSeparators["sep%q"])},
["sep%r"] = {copyTable(defaultSeparators["sep%r"])},
["punc"] = {copyTable(defaultSeparators["punc"])}
}
cfg.entity = nil
cfg.entityID = nil
cfg.propertyID = nil
cfg.propertyValue = nil
cfg.qualifierIDs = {}
cfg.qualifierIDsAndValues = {}
cfg.bestRank = true
cfg.ranks = {true, true, false} -- preferred = true, normal = true, deprecated = false
cfg.foundRank = #cfg.ranks
cfg.flagBest = false
cfg.flagRank = false
cfg.periods = {true, true, true} -- future = true, current = true, former = true
cfg.flagPeriod = false
cfg.mdyDate = false
cfg.singleClaim = false
cfg.sourcedOnly = false
cfg.editable = false
cfg.editAtEnd = false
cfg.inSitelinks = false
cfg.langCode = mw.language.getContentLanguage().code
cfg.langName = mw.language.fetchLanguageName(cfg.langCode, cfg.langCode)
cfg.langObj = mw.language.new(cfg.langCode)
-- somewhat reliable way of determining global site ID in the absence of a library function, targeting the Wikipedia project (i.e. appending "wiki")
cfg.siteID = (function() for i,v in pairs(mw.site.interwikiMap("local")) do if v.isCurrentWiki and i~="w" then return mw.ustring.gsub(i,"-","_").."wiki" end end end)()
cfg.states = {}
cfg.states.qualifiersCount = 0
cfg.curState = nil
cfg.prefetchedRefs = nil
return cfg
end
local State = {}
State.__index = State
function State.new(cfg)
local stt = {}
setmetatable(stt, State)
stt.conf = cfg
stt.results = {}
stt.parsedFormat = {}
stt.separator = {}
stt.movSeparator = {}
stt.puncMark = {}
stt.linked = false
stt.rawValue = false
stt.shortName = false
stt.anyLanguage = false
stt.unitOnly = false
stt.singleValue = false
return stt
end
function replaceAlias(id)
if p.aliasesP[id] then
id = p.aliasesP[id]
end
return id
end
function errorText(code, param)
local text = i18n["errors"][code]
if param then text = mw.ustring.gsub(text, "$1", param) end
return text
end
function throwError(errorMessage, param)
error(errorText(errorMessage, param))
end
function replaceDecimalMark(num)
return mw.ustring.gsub(num, "[.]", i18n['numeric']['decimal-mark'], 1)
end
function padZeros(num, numDigits)
local numZeros
local negative = false
if num < 0 then
negative = true
num = num * -1
end
num = tostring(num)
numZeros = numDigits - num:len()
for i = 1, numZeros do
num = "0"..num
end
if negative then
num = "-"..num
end
return num
end
function replaceSpecialChar(chr)
if chr == '_' then
-- replace underscores with spaces
return ' '
else
return chr
end
end
function replaceSpecialChars(str)
local chr
local esc = false
local strOut = ""
for i = 1, #str do
chr = str:sub(i,i)
if not esc then
if chr == '\\' then
esc = true
else
strOut = strOut .. replaceSpecialChar(chr)
end
else
strOut = strOut .. chr
esc = false
end
end
return strOut
end
function buildWikilink(target, label)
if not label or target == label then
return "[[" .. target .. "]]"
else
return "[[" .. target .. "|" .. label .. "]]"
end
end
-- used to make frame.args mutable, to replace #frame.args (which is always 0)
-- with the actual amount and to simply copy tables
function copyTable(tIn)
if not tIn then
return nil
end
local tOut = {}
for i, v in pairs(tIn) do
tOut[i] = v
end
return tOut
end
-- used to merge output arrays together;
-- note that it currently mutates the first input array
function mergeArrays(a1, a2)
for i = 1, #a2 do
a1[#a1 + 1] = a2[i]
end
return a1
end
function split(str, del)
local out = {}
local i, j = str:find(del)
if i and j then
out[1] = str:sub(1, i - 1)
out[2] = str:sub(j + 1)
else
out[1] = str
end
return out
end
function parseWikidataURL(url)
local id
if url:match('^http[s]?://') then
id = split(url, "Q")
if id[2] then
return "Q" .. id[2]
end
end
return nil
end
function parseDate(dateStr, precision)
precision = precision or "d"
local i, j, index, ptr
local parts = {nil, nil, nil}
if dateStr == nil then
return parts[1], parts[2], parts[3] -- year, month, day
end
-- 'T' for snak values, '/' for outputs with '/Julian' attached
i, j = dateStr:find("[T/]")
if i then
dateStr = dateStr:sub(1, i-1)
end
local from = 1
if dateStr:sub(1,1) == "-" then
-- this is a negative number, look further ahead
from = 2
end
index = 1
ptr = 1
i, j = dateStr:find("-", from)
if i then
-- year
parts[index] = tonumber(mw.ustring.gsub(dateStr:sub(ptr, i-1), "^\+(.+)$", "%1"), 10) -- remove '+' sign (explicitly give base 10 to prevent error)
if parts[index] == -0 then
parts[index] = tonumber("0") -- for some reason, 'parts[index] = 0' may actually store '-0', so parse from string instead
end
if precision == "y" then
-- we're done
return parts[1], parts[2], parts[3] -- year, month, day
end
index = index + 1
ptr = i + 1
i, j = dateStr:find("-", ptr)
if i then
-- month
parts[index] = tonumber(dateStr:sub(ptr, i-1), 10)
if precision == "m" then
-- we're done
return parts[1], parts[2], parts[3] -- year, month, day
end
index = index + 1
ptr = i + 1
end
end
if dateStr:sub(ptr) ~= "" then
-- day if we have month, month if we have year, or year
parts[index] = tonumber(dateStr:sub(ptr), 10)
end
return parts[1], parts[2], parts[3] -- year, month, day
end
function datePrecedesDate(aY, aM, aD, bY, bM, bD)
if aY == nil or bY == nil then
return nil
end
aM = aM or 1
aD = aD or 1
bM = bM or 1
bD = bD or 1
if aY < bY then
return true
end
if aY > bY then
return false
end
if aM < bM then
return true
end
if aM > bM then
return false
end
if aD < bD then
return true
end
return false
end
function getHookName(param, index)
if hookNames[param] then
return hookNames[param][index]
elseif param:len() > 2 then
return hookNames[param:sub(1, 2).."\\d"][index]
else
return nil
end
end
function alwaysTrue()
return true
end
-- The following function parses a format string.
--
-- The example below shows how a parsed string is structured in memory.
-- Variables other than 'str' and 'child' are left out for clarity's sake.
--
-- Example:
-- "A %p B [%s[%q1]] C [%r] D"
--
-- Structure:
-- [
-- {
-- str = "A "
-- },
-- {
-- str = "%p"
-- },
-- {
-- str = " B ",
-- child =
-- [
-- {
-- str = "%s",
-- child =
-- [
-- {
-- str = "%q1"
-- }
-- ]
-- }
-- ]
-- },
-- {
-- str = " C ",
-- child =
-- [
-- {
-- str = "%r"
-- }
-- ]
-- },
-- {
-- str = " D"
-- }
-- ]
--
function parseFormat(str)
local chr, esc, param, root, cur, prev, new
local params = {}
local function newObject(array)
local obj = {} -- new object
obj.str = ""
array[#array + 1] = obj -- array{object}
obj.parent = array
return obj
end
local function endParam()
if param > 0 then
if cur.str ~= "" then
cur.str = "%"..cur.str
cur.param = true
params[cur.str] = true
cur.parent.req[cur.str] = true
prev = cur
cur = newObject(cur.parent)
end
param = 0
end
end
root = {} -- array
root.req = {}
cur = newObject(root)
prev = nil
esc = false
param = 0
for i = 1, #str do
chr = str:sub(i,i)
if not esc then
if chr == '\\' then
endParam()
esc = true
elseif chr == '%' then
endParam()
if cur.str ~= "" then
cur = newObject(cur.parent)
end
param = 2
elseif chr == '[' then
endParam()
if prev and cur.str == "" then
table.remove(cur.parent)
cur = prev
end
cur.child = {} -- new array
cur.child.req = {}
cur.child.parent = cur
cur = newObject(cur.child)
elseif chr == ']' then
endParam()
if cur.parent.parent then
new = newObject(cur.parent.parent.parent)
if cur.str == "" then
table.remove(cur.parent)
end
cur = new
end
else
if param > 1 then
param = param - 1
elseif param == 1 then
if not chr:match('%d') then
endParam()
end
end
cur.str = cur.str .. replaceSpecialChar(chr)
end
else
cur.str = cur.str .. chr
esc = false
end
prev = nil
end
endParam()
-- make sure that at least one required parameter has been defined
if not next(root.req) then
throwError("missing-required-parameter")
end
-- make sure that the separator parameter "%s" is not amongst the required parameters
if root.req[parameters.separator] then
throwError("extra-required-parameter", parameters.separator)
end
return root, params
end
function sortOnRank(claims)
local rankPos
local ranks = {{}, {}, {}, {}} -- preferred, normal, deprecated, (default)
local sorted = {}
for i, v in ipairs(claims) do
rankPos = rankTable[v.rank] or 4
ranks[rankPos][#ranks[rankPos] + 1] = v
end
sorted = ranks[1]
sorted = mergeArrays(sorted, ranks[2])
sorted = mergeArrays(sorted, ranks[3])
return sorted
end
-- if id == nil then item connected to current page is used
function Config:getLabel(id, raw, link, short)
local label = nil
local title = nil
local prefix= ""
local lang
if not id then
id = mw.wikibase.getEntityIdForCurrentPage()
if not id then
return ""
end
end
id = id:upper() -- just to be sure
if raw then
-- check if given id actually exists
if mw.wikibase.getEntity(id) then
label = id
if id:sub(1,1) == "P" then
prefix = "Property:"
end
end
prefix = "d:" .. prefix
title = label -- may be nil
else
-- try short name first if requested
if short then
label = p._property({p.aliasesP.shortName, [p.args.eid] = id}) -- get short name
if label == "" then
label = nil
end
end
-- get label
if not label then
label, lang = mw.wikibase.getLabelWithLang(id)
-- don't allow language fallback
if lang ~= self.langCode then
label = nil
end
end
end
if not label then
label = ""
elseif link then
-- build a link if requested
if not title then
if id:sub(1,1) == "Q" then
title = mw.wikibase.sitelink(id)
elseif id:sub(1,1) == "P" then
-- properties have no sitelink, link to Wikidata instead
title = id
prefix = "d:Property:"
end
end
if title then
label = buildWikilink(prefix .. title, label)
end
end
return label
end
function Config:getEditIcon()
local value = ""
local prefix = ""
local front = " "
local back = ""
if self.entityID:sub(1,1) == "P" then
prefix = "Property:"
end
if self.editAtEnd then
front = '<span style="float:'
if self.langObj:isRTL() then
front = front .. 'left'
else
front = front .. 'right'
end
front = front .. '">'
back = '</span>'
end
value = "[[File:Blue pencil.svg|frameless|text-top|10px|alt=" .. i18n['info']['edit-on-wikidata'] .. "|link=https://www.wikidata.org/wiki/" .. prefix .. self.entityID .. "?uselang=" .. self.langCode
if self.propertyID then
value = value .. "#" .. self.propertyID
elseif self.inSitelinks then
value = value .. "#sitelinks-wikipedia"
end
value = value .. "|" .. i18n['info']['edit-on-wikidata'] .. "]]"
return front .. value .. back
end
-- used to create the final output string when it's all done, so that for references the
-- function extensionTag("ref", ...) is only called when they really ended up in the final output
function Config:concatValues(valuesArray)
local outString = ""
local j, skip
for i = 1, #valuesArray do
-- check if this is a reference
if valuesArray[i].refHash then
j = i - 1
skip = false
-- skip this reference if it is part of a continuous row of references that already contains the exact same reference
while valuesArray[j] and valuesArray[j].refHash do
if valuesArray[i].refHash == valuesArray[j].refHash then
skip = true
break
end
j = j - 1
end
if not skip then
-- add <ref> tag with the reference's hash as its name (to deduplicate references)
outString = outString .. mw.getCurrentFrame():extensionTag("ref", valuesArray[i][1], {name = "wikidata-" .. valuesArray[i].refHash .. "-v" .. i18n['cite']['version']})
end
else
outString = outString .. valuesArray[i][1]
end
end
return outString
end
function Config:convertUnit(unit, raw, link, short, unitOnly)
local space = " "
local label = ""
if unit == "" or unit == "1" then
return nil
end
if unitOnly then
space = ""
end
itemID = parseWikidataURL(unit)
if itemID then
if itemID == aliasesQ.percentage then
return "%"
else
label = self:getLabel(itemID, raw, link, short)
if label ~= "" then
return space .. label
end
end
end
return ""
end
function Config:getValue(snak, raw, link, short, anyLang, unitOnly, noSpecial)
if snak.snaktype == 'value' then
local datatype = snak.datavalue.type
local subtype = snak.datatype
local datavalue = snak.datavalue.value
if datatype == 'string' then
if subtype == 'url' and link then
-- create link explicitly
if raw then
-- will render as a linked number like [1]
return "[" .. datavalue .. "]"
else
return "[" .. datavalue .. " " .. datavalue .. "]"
end
elseif subtype == 'commonsMedia' then
if link then
return buildWikilink("c:File:" .. datavalue, datavalue)
elseif not raw then
return "[[File:" .. datavalue .. "]]"
else
return datavalue
end
elseif subtype == 'geo-shape' and link then
return buildWikilink("c:" .. datavalue, datavalue)
elseif subtype == 'math' and not raw then
return mw.getCurrentFrame():extensionTag("math", datavalue)
elseif subtype == 'external-id' and link then
local url = p._property({p.aliasesP.formatterURL, [p.args.eid] = snak.property}) -- get formatter URL
if url ~= "" then
url = mw.ustring.gsub(url, "$1", datavalue)
return "[" .. url .. " " .. datavalue .. "]"
else
return datavalue
end
else
return datavalue
end
elseif datatype == 'monolingualtext' then
if anyLang then
return datavalue['text'], datavalue['language']
elseif datavalue['language'] == self.langCode then
return datavalue['text']
else
return nil
end
elseif datatype == 'quantity' then
local value = ""
local unit
if not unitOnly then
-- get value and strip + signs from front
value = mw.ustring.gsub(datavalue['amount'], "^\+(.+)$", "%1")
if raw then
return value
end
-- replace decimal mark based on locale
value = replaceDecimalMark(value)
-- add delimiters for readability
value = i18n.addDelimiters(value)
end
unit = self:convertUnit(datavalue['unit'], raw, link, short, unitOnly)
if unit then
value = value .. unit
end
return value
elseif datatype == 'time' then
local y, m, d, p, yDiv, yRound, yFull, value, calendarID, dateStr
local yFactor = 1
local sign = 1
local prefix = ""
local suffix = ""
local mayAddCalendar = false
local calendar = ""
local precision = datavalue['precision']
if precision == 11 then
p = "d"
elseif precision == 10 then
p = "m"
else
p = "y"
yFactor = 10^(9-precision)
end
y, m, d = parseDate(datavalue['time'], p)
if y < 0 then
sign = -1
y = y * sign
end
-- if precision is tens/hundreds/thousands/millions/billions of years
if precision <= 8 then
yDiv = y / yFactor
-- if precision is tens/hundreds/thousands of years
if precision >= 6 then
mayAddCalendar = true
if precision <= 7 then
-- round centuries/millenniums up (e.g. 20th century or 3rd millennium)
yRound = math.ceil(yDiv)
if not raw then
if precision == 6 then
suffix = i18n['datetime']['suffixes']['millennium']
else
suffix = i18n['datetime']['suffixes']['century']
end
suffix = i18n.getOrdinalSuffix(yRound) .. suffix
else
-- if not verbose, take the first year of the century/millennium
-- (e.g. 1901 for 20th century or 2001 for 3rd millennium)
yRound = (yRound - 1) * yFactor + 1
end
else
-- precision == 8
-- round decades down (e.g. 2010s)
yRound = math.floor(yDiv) * yFactor
if not raw then
prefix = i18n['datetime']['prefixes']['decade-period']
suffix = i18n['datetime']['suffixes']['decade-period']
end
end
if raw and sign < 0 then
-- if BCE then compensate for "counting backwards"
-- (e.g. -2019 for 2010s BCE, -2000 for 20th century BCE or -3000 for 3rd millennium BCE)
yRound = yRound + yFactor - 1
end
else
local yReFactor, yReDiv, yReRound
-- round to nearest for tens of thousands of years or more
yRound = math.floor(yDiv + 0.5)
if yRound == 0 then
if precision <= 2 and y ~= 0 then
yReFactor = 1e6
yReDiv = y / yReFactor
yReRound = math.floor(yReDiv + 0.5)
if yReDiv == yReRound then
-- change precision to millions of years only if we have a whole number of them
precision = 3
yFactor = yReFactor
yRound = yReRound
end
end
if yRound == 0 then
-- otherwise, take the unrounded (original) number of years
precision = 5
yFactor = 1
yRound = y
mayAddCalendar = true
end
end
if precision >= 1 and y ~= 0 then
yFull = yRound * yFactor
yReFactor = 1e9
yReDiv = yFull / yReFactor
yReRound = math.floor(yReDiv + 0.5)
if yReDiv == yReRound then
-- change precision to billions of years if we're in that range
precision = 0
yFactor = yReFactor
yRound = yReRound
else
yReFactor = 1e6
yReDiv = yFull / yReFactor
yReRound = math.floor(yReDiv + 0.5)
if yReDiv == yReRound then
-- change precision to millions of years if we're in that range
precision = 3
yFactor = yReFactor
yRound = yReRound
end
end
end
if not raw then
if precision == 3 then
suffix = i18n['datetime']['suffixes']['million-years']
elseif precision == 0 then
suffix = i18n['datetime']['suffixes']['billion-years']
else
yRound = yRound * yFactor
if yRound == 1 then
suffix = i18n['datetime']['suffixes']['year']
else
suffix = i18n['datetime']['suffixes']['years']
end
end
else
yRound = yRound * yFactor
end
end
else
yRound = y
mayAddCalendar = true
end
if mayAddCalendar then
calendarID = parseWikidataURL(datavalue['calendarmodel'])
if calendarID and calendarID == aliasesQ.prolepticJulianCalendar then
if not raw then
if link then
calendar = " ("..buildWikilink(i18n['datetime']['julian-calendar'], i18n['datetime']['julian'])..")"
else
calendar = " ("..i18n['datetime']['julian']..")"
end
else
calendar = "/"..i18n['datetime']['julian']
end
end
end
if not raw then
local ce = nil
if sign < 0 then
ce = i18n['datetime']['BCE']
elseif precision <= 5 then
ce = i18n['datetime']['CE']
end
if ce then
if link then
ce = buildWikilink(i18n['datetime']['common-era'], ce)
end
suffix = suffix .. " " .. ce
end
value = tostring(yRound)
if m then
dateStr = self.langObj:formatDate("F", "1-"..m.."-1")
if d then
if self.mdyDate then
dateStr = dateStr .. " " .. d .. ","
else
dateStr = d .. " " .. dateStr
end
end
value = dateStr .. " " .. value
end
value = prefix .. value .. suffix .. calendar
else
value = padZeros(yRound * sign, 4)
if m then
value = value .. "-" .. padZeros(m, 2)
if d then
value = value .. "-" .. padZeros(d, 2)
end
end
value = value .. calendar
end
return value
elseif datatype == 'globecoordinate' then
-- logic from https://github.com/DataValues/Geo
local precision, numDigits, strFormat, value, globe
local latValue, latitude, latDegrees, latMinutes, latSeconds
local lonValue, longitude, lonDegrees, lonMinutes, lonSeconds
local latDirection, latDirectionN, latDirectionS, latDirectionEN
local lonDirection, lonDirectionE, lonDirectionW, lonDirectionEN
local latDirectionEN_N = "N"
local latDirectionEN_S = "S"
local lonDirectionEN_E = "E"
local lonDirectionEN_W = "W"
if not raw then
latDirectionN = i18n['coord']['latitude-north']
latDirectionS = i18n['coord']['latitude-south']
lonDirectionE = i18n['coord']['longitude-east']
lonDirectionW = i18n['coord']['longitude-west']
degSymbol = i18n['coord']['degrees']
minSymbol = i18n['coord']['minutes']
secSymbol = i18n['coord']['seconds']
separator = i18n['coord']['separator']
else
latDirectionN = latDirectionEN_N
latDirectionS = latDirectionEN_S
lonDirectionE = lonDirectionEN_E
lonDirectionW = lonDirectionEN_W
degSymbol = "/"
minSymbol = "/"
secSymbol = "/"
separator = "/"
end
latitude = datavalue['latitude']
longitude = datavalue['longitude']
if latitude < 0 then
latDirection = latDirectionS
latDirectionEN = latDirectionEN_S
latitude = math.abs(latitude)
else
latDirection = latDirectionN
latDirectionEN = latDirectionEN_N
end
if longitude < 0 then
lonDirection = lonDirectionW
lonDirectionEN = lonDirectionEN_W
longitude = math.abs(longitude)
else
lonDirection = lonDirectionE
lonDirectionEN = lonDirectionEN_E
end
precision = datavalue['precision']
if not precision or precision == 0 then
precision = 1 / 3600 -- precision unspecified, set to arcsecond
end
latitude = math.floor(latitude / precision + 0.5) * precision
longitude = math.floor(longitude / precision + 0.5) * precision
numDigits = math.ceil(-math.log10(3600 * precision))
if numDigits < 0 or numDigits == -0 then
numDigits = tonumber("0") -- for some reason, 'numDigits = 0' may actually store '-0', so parse from string instead
end
strFormat = "%." .. numDigits .. "f"
-- use string.format() to strip decimal point followed by a zero (.0) for whole numbers
latSeconds = tonumber(strFormat:format(math.floor(latitude * 3600 * 10^numDigits + 0.5) / 10^numDigits))
lonSeconds = tonumber(strFormat:format(math.floor(longitude * 3600 * 10^numDigits + 0.5) / 10^numDigits))
latMinutes = math.floor(latSeconds / 60)
lonMinutes = math.floor(lonSeconds / 60)
latSeconds = latSeconds - (latMinutes * 60)
lonSeconds = lonSeconds - (lonMinutes * 60)
latDegrees = math.floor(latMinutes / 60)
lonDegrees = math.floor(lonMinutes / 60)
latMinutes = latMinutes - (latDegrees * 60)
lonMinutes = lonMinutes - (lonDegrees * 60)
latValue = latDegrees .. degSymbol
lonValue = lonDegrees .. degSymbol
if precision < 1 then
latValue = latValue .. latMinutes .. minSymbol
lonValue = lonValue .. lonMinutes .. minSymbol
end
if precision < (1 / 60) then
latSeconds = strFormat:format(latSeconds)
lonSeconds = strFormat:format(lonSeconds)
if not raw then
-- replace decimal marks based on locale
latSeconds = replaceDecimalMark(latSeconds)
lonSeconds = replaceDecimalMark(lonSeconds)
end
latValue = latValue .. latSeconds .. secSymbol
lonValue = lonValue .. lonSeconds .. secSymbol
end
latValue = latValue .. latDirection
lonValue = lonValue .. lonDirection
value = latValue .. separator .. lonValue
if link then
globe = parseWikidataURL(datavalue['globe'])
if globe then
globe = mw.wikibase.getEntity(globe):getLabel("en"):lower()
else
globe = "earth"
end
value = "[https://tools.wmflabs.org/geohack/geohack.php?language="..self.langCode.."¶ms="..latitude.."_"..latDirectionEN.."_"..longitude.."_"..lonDirectionEN.."_globe:"..globe.." "..value.."]"
end
return value
elseif datatype == 'wikibase-entityid' then
local label
local itemID = datavalue['numeric-id']
if subtype == 'wikibase-item' then
itemID = "Q" .. itemID
elseif subtype == 'wikibase-property' then
itemID = "P" .. itemID
else
return '<strong class="error">' .. errorText('unknown-data-type', subtype) .. '</strong>'
end
label = self:getLabel(itemID, raw, link, short)
if label == "" then
label = nil
end
return label
else
return '<strong class="error">' .. errorText('unknown-data-type', datatype) .. '</strong>'
end
elseif snak.snaktype == 'somevalue' and not noSpecial then
if raw then
return " " -- single space represents 'somevalue'
else
return i18n['values']['unknown']
end
elseif snak.snaktype == 'novalue' and not noSpecial then
if raw then
return "" -- empty string represents 'novalue'
else
return i18n['values']['none']
end
else
return nil
end
end
function Config:getSingleRawQualifier(claim, qualifierID)
local qualifiers
if claim.qualifiers then qualifiers = claim.qualifiers[qualifierID] end
if qualifiers and qualifiers[1] then
return self:getValue(qualifiers[1], true) -- raw = true
else
return nil
end
end
function Config:snakEqualsValue(snak, value)
local snakValue = self:getValue(snak, true) -- raw = true
if snakValue and snak.snaktype == 'value' and snak.datavalue.type == 'wikibase-entityid' then value = value:upper() end
return snakValue == value
end
function Config:setRank(rank)
local rankPos
if rank == p.flags.best then
self.bestRank = true
self.flagBest = true -- mark that 'best' flag was given
return
end
if rank:sub(1,9) == p.flags.preferred then
rankPos = 1
elseif rank:sub(1,6) == p.flags.normal then
rankPos = 2
elseif rank:sub(1,10) == p.flags.deprecated then
rankPos = 3
else
return
end
-- one of the rank flags was given, check if another one was given before
if not self.flagRank then
self.ranks = {false, false, false} -- no other rank flag given before, so unset ranks
self.bestRank = self.flagBest -- unsets bestRank only if 'best' flag was not given before
self.flagRank = true -- mark that a rank flag was given
end
if rank:sub(-1) == "+" then
for i = rankPos, 1, -1 do
self.ranks[i] = true
end
elseif rank:sub(-1) == "-" then
for i = rankPos, #self.ranks do
self.ranks[i] = true
end
else
self.ranks[rankPos] = true
end
end
function Config:setPeriod(period)
local periodPos
if period == p.flags.future then
periodPos = 1
elseif period == p.flags.current then
periodPos = 2
elseif period == p.flags.former then
periodPos = 3
else
return
end
-- one of the period flags was given, check if another one was given before
if not self.flagPeriod then
self.periods = {false, false, false} -- no other period flag given before, so unset periods
self.flagPeriod = true -- mark that a period flag was given
end
self.periods[periodPos] = true
end
function Config:qualifierMatches(claim, id, value)
local qualifiers
if claim.qualifiers then qualifiers = claim.qualifiers[id] end
if qualifiers then
for i, v in pairs(qualifiers) do
if self:snakEqualsValue(v, value) then
return true
end
end
elseif value == "" then
-- if the qualifier is not present then treat it the same as the special value 'novalue'
return true
end
return false
end
function Config:rankMatches(rankPos)
if self.bestRank then
return (self.ranks[rankPos] and self.foundRank >= rankPos)
else
return self.ranks[rankPos]
end
end
function Config:timeMatches(claim)
local startTime = nil
local startTimeY = nil
local startTimeM = nil
local startTimeD = nil
local endTime = nil
local endTimeY = nil
local endTimeM = nil
local endTimeD = nil
if self.periods[1] and self.periods[2] and self.periods[3] then
-- any time
return true
end
local now = os.date('!*t')
startTime = self:getSingleRawQualifier(claim, p.aliasesP.startTime)
if startTime and startTime ~= "" and startTime ~= " " then
startTimeY, startTimeM, startTimeD = parseDate(startTime)
end
endTime = self:getSingleRawQualifier(claim, p.aliasesP.endTime)
if endTime and endTime ~= "" and endTime ~= " " then
endTimeY, endTimeM, endTimeD = parseDate(endTime)
elseif endTime == " " then
-- end time is 'unknown', assume it is somewhere in the past;
-- we can do this by taking the current date as a placeholder for the end time
endTimeY = now['year']
endTimeM = now['month']
endTimeD = now['day']
end
if startTimeY ~= nil and endTimeY ~= nil and datePrecedesDate(endTimeY, endTimeM, endTimeD, startTimeY, startTimeM, startTimeD) then
-- invalidate end time if it precedes start time
endTimeY = nil
endTimeM = nil
endTimeD = nil
end
if self.periods[1] then
-- future
if startTimeY and datePrecedesDate(now['year'], now['month'], now['day'], startTimeY, startTimeM, startTimeD) then
return true
end
end
if self.periods[2] then
-- current
if (startTimeY == nil or not datePrecedesDate(now['year'], now['month'], now['day'], startTimeY, startTimeM, startTimeD)) and
(endTimeY == nil or datePrecedesDate(now['year'], now['month'], now['day'], endTimeY, endTimeM, endTimeD)) then
return true
end
end
if self.periods[3] then
-- former
if endTimeY and not datePrecedesDate(now['year'], now['month'], now['day'], endTimeY, endTimeM, endTimeD) then
return true
end
end
return false
end
function Config:processFlag(flag)
if not flag then
return false
else
flag = mw.text.trim(flag)
end
if flag == p.flags.linked then
self.curState.linked = true
return true
elseif flag == p.flags.raw then
self.curState.rawValue = true
if self.curState == self.states[parameters.reference] then
-- raw reference values end with periods and require a separator (other than none)
self.separators["sep%r"][1] = {" "}
end
return true
elseif flag == p.flags.short then
self.curState.shortName = true
return true
elseif flag == p.flags.multilanguage then
self.curState.anyLanguage = true
return true
elseif flag == p.flags.unit then
self.curState.unitOnly = true
return true
elseif flag == p.flags.mdy then
self.mdyDate = true
return true
elseif flag == p.flags.single then
self.singleClaim = true
return true
elseif flag == p.flags.sourced then
self.sourcedOnly = true
return true
elseif flag == p.flags.edit then
self.editable = true
return true
elseif flag == p.flags.editAtEnd then
self.editable = true
self.editAtEnd = true
return true
elseif flag == p.flags.best or flag:match('^'..p.flags.preferred..'[+-]?$') or flag:match('^'..p.flags.normal..'[+-]?$') or flag:match('^'..p.flags.deprecated..'[+-]?$') then
self:setRank(flag)
return true
elseif flag == p.flags.future or flag == p.flags.current or flag == p.flags.former then
self:setPeriod(flag)
return true
elseif flag == "" then
-- ignore empty flags and carry on
return true
else
return false
end
end
function Config:processFlagOrCommand(flag)
local param = ""
if not flag then
return false
else
flag = mw.text.trim(flag)
end
if flag == p.claimCommands.property or flag == p.claimCommands.properties then
param = parameters.property
elseif flag == p.claimCommands.qualifier or flag == p.claimCommands.qualifiers then
self.states.qualifiersCount = self.states.qualifiersCount + 1
param = parameters.qualifier .. self.states.qualifiersCount
self.separators["sep"..param] = {copyTable(defaultSeparators["sep%q\\d"])}
elseif flag == p.claimCommands.reference or flag == p.claimCommands.references then
param = parameters.reference
else
return self:processFlag(flag)
end
if self.states[param] then
return false
end
-- create a new state for each command
self.states[param] = State.new(self)
-- use "%x" as the general parameter name
self.states[param].parsedFormat = parseFormat(parameters.general) -- will be overwritten for param=="%p"
-- set the separator
self.states[param].separator = self.separators["sep"..param] -- will be nil for param=="%p", which will be set separately
if flag:sub(-1) ~= 's' then
self.states[param].singleValue = true
end
self.curState = self.states[param]
return true
end
function Config:processSeparators(args)
local sep
for i, v in pairs(self.separators) do
if args[i] then
sep = replaceSpecialChars(args[i])
if sep ~= "" then
self.separators[i][1] = {sep}
else
self.separators[i][1] = nil
end
end
end
end
function Config:setFormatAndSeparators(state, parsedFormat)
state.parsedFormat = parsedFormat
state.separator = self.separators["sep"]
state.movSeparator = self.separators["sep"..parameters.separator]
state.puncMark = self.separators["punc"]
end
-- determines if a claim has references by prefetching them from the claim using getReferences,
-- which applies some filtering that determines if a reference is actually returned,
-- and caches the references for later use
function State:isSourced(claim)
self.conf.prefetchedRefs = self:getReferences(claim)
return (#self.conf.prefetchedRefs > 0)
end
function State:resetCaches()
-- any prefetched references of the previous claim must not be used
self.conf.prefetchedRefs = nil
end
function State:claimMatches(claim)
local matches, rankPos
-- first of all, reset any cached values used for the previous claim
self:resetCaches()
-- if a property value was given, check if it matches the claim's property value
if self.conf.propertyValue then
matches = self.conf:snakEqualsValue(claim.mainsnak, self.conf.propertyValue)
else
matches = true
end
-- if any qualifier values were given, check if each matches one of the claim's qualifier values
for i, v in pairs(self.conf.qualifierIDsAndValues) do
matches = (matches and self.conf:qualifierMatches(claim, i, v))
end
-- check if the claim's rank and time period match
rankPos = rankTable[claim.rank] or 4
matches = (matches and self.conf:rankMatches(rankPos) and self.conf:timeMatches(claim))
-- if only claims with references must be returned, check if this one has any
if self.conf.sourcedOnly then
matches = (matches and self:isSourced(claim)) -- prefetches and caches references
end
return matches, rankPos
end
function State:out()
local result -- collection of arrays with value objects
local valuesArray -- array with value objects
local sep = nil -- value object
local out = {} -- array with value objects
local function walk(formatTable, result)
local valuesArray = {} -- array with value objects
for i, v in pairs(formatTable.req) do
if not result[i] or not result[i][1] then
-- we've got no result for a parameter that is required on this level,
-- so skip this level (and its children) by returning an empty result
return {}
end
end
for i, v in ipairs(formatTable) do
if v.param then
valuesArray = mergeArrays(valuesArray, result[v.str])
elseif v.str ~= "" then
valuesArray[#valuesArray + 1] = {v.str}
end
if v.child then
valuesArray = mergeArrays(valuesArray, walk(v.child, result))
end
end
return valuesArray
end
-- iterate through the results from back to front, so that we know when to add separators
for i = #self.results, 1, -1 do
result = self.results[i]
-- if there is already some output, then add the separators
if #out > 0 then
sep = self.separator[1] -- fixed separator
result[parameters.separator] = {self.movSeparator[1]} -- movable separator
else
sep = nil
result[parameters.separator] = {self.puncMark[1]} -- optional punctuation mark
end
valuesArray = walk(self.parsedFormat, result)
if #valuesArray > 0 then
if sep then
valuesArray[#valuesArray + 1] = sep
end
out = mergeArrays(valuesArray, out)
end
end
-- reset state before next iteration
self.results = {}
return out
end
-- level 1 hook
function State:getProperty(claim)
local value = {self.conf:getValue(claim.mainsnak, self.rawValue, self.linked, self.shortName, self.anyLanguage, self.unitOnly)} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
-- level 1 hook
function State:getQualifiers(claim, param)
local qualifiers
if claim.qualifiers then qualifiers = claim.qualifiers[self.conf.qualifierIDs[param]] end
if qualifiers then
-- iterate through claim's qualifier statements to collect their values;
-- return array with multiple value objects
return self.conf.states[param]:iterate(qualifiers, {[parameters.general] = hookNames[parameters.qualifier.."\\d"][2], count = 1}) -- pass qualifier state with level 2 hook
else
return {} -- return empty array
end
end
-- level 2 hook
function State:getQualifier(snak)
local value = {self.conf:getValue(snak, self.rawValue, self.linked, self.shortName, self.anyLanguage, self.unitOnly)} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
-- level 1 hook
function State:getAllQualifiers(claim, param, result, hooks)
local out = {} -- array with value objects
local sep = self.conf.separators["sep"..parameters.qualifier][1] -- value object
-- iterate through the output of the separate "qualifier(s)" commands
for i = 1, self.conf.states.qualifiersCount do
-- if a hook has not been called yet, call it now
if not result[parameters.qualifier..i] then
self:callHook(parameters.qualifier..i, hooks, claim, result)
end
-- if there is output for this particular "qualifier(s)" command, then add it
if result[parameters.qualifier..i] and result[parameters.qualifier..i][1] then
-- if there is already some output, then add the separator
if #out > 0 and sep then
out[#out + 1] = sep
end
out = mergeArrays(out, result[parameters.qualifier..i])
end
end
return out
end
-- level 1 hook
function State:getReferences(claim)
if self.conf.prefetchedRefs then
-- return references that have been prefetched by isSourced
return self.conf.prefetchedRefs
end
if claim.references then
-- iterate through claim's reference statements to collect their values;
-- return array with multiple value objects
return self.conf.states[parameters.reference]:iterate(claim.references, {[parameters.general] = hookNames[parameters.reference][2], count = 1}) -- pass reference state with level 2 hook
else
return {} -- return empty array
end
end
-- level 2 hook
function State:getReference(statement)
local key, citeWeb, citeQ, label
local params = {}
local citeParams = {['web'] = {}, ['q'] = {}}
local citeMismatch = {}
local useCite = nil
local useParams = nil
local value = ""
local ref = {}
if statement.snaks then
-- don't include "imported from", which is added by a bot
if statement.snaks[p.aliasesP.importedFrom] then
statement.snaks[p.aliasesP.importedFrom] = nil
end
-- don't include "language" if it is equal to the local one
if self:getReferenceDetail(statement.snaks, p.aliasesP.language) == self.conf.langName then
statement.snaks[p.aliasesP.language] = nil
end
-- retrieve all the parameters
for i in pairs(statement.snaks) do
label = ""
-- multiple authors may be given
if i == p.aliasesP.author then
params[i] = self:getReferenceDetails(statement.snaks, i, false, self.linked, true) -- link = true/false, anyLang = true
else
params[i] = {self:getReferenceDetail(statement.snaks, i, false, (self.linked or (i == p.aliasesP.statedIn)) and (statement.snaks[i][1].datatype ~= 'url'), true)} -- link = true/false, anyLang = true
end
if #params[i] == 0 then
params[i] = nil
else
if statement.snaks[i][1].datatype == 'external-id' then
key = "external-id"
label = self.conf:getLabel(i)
if label ~= "" then
label = label .. " "
end
else
key = i
end
-- add the parameter to each matching type of citation
for j in pairs(citeParams) do
-- do so if there was no mismatch with a previous parameter
if not citeMismatch[j] then
-- check if this parameter is not mismatching itself
if i18n['cite'][j][key] then
-- continue if an option is available in the corresponding cite template
if i18n['cite'][j][key] ~= "" then
citeParams[j][i18n['cite'][j][key]] = label .. params[i][1]
-- if there are multiple parameter values (authors), add those too
for k=2, #params[i] do
citeParams[j][i18n['cite'][j][key]..k] = label .. params[i][k]
end
end
else
citeMismatch[j] = true
end
end
end
end
end
-- get title of general template for citing web references
citeWeb = split(mw.wikibase.sitelink(aliasesQ.citeWeb) or "", ":")[2] -- split off namespace from front
-- get title of template that expands stated-in references into citations
citeQ = split(mw.wikibase.sitelink(aliasesQ.citeQ) or "", ":")[2] -- split off namespace from front
-- (1) use the general template for citing web references if there is a match and if at least both "reference URL" and "title" are present
if citeWeb and not citeMismatch['web'] and citeParams['web'][i18n['cite']['web'][p.aliasesP.referenceURL]] and citeParams['web'][i18n['cite']['web'][p.aliasesP.title]] then
useCite = citeWeb
useParams = citeParams['web']
-- (2) use the template that expands stated-in references into citations if there is a match and if at least "stated in" is present
elseif citeQ and not citeMismatch['q'] and citeParams['q'][i18n['cite']['q'][p.aliasesP.statedIn]] then
-- we need the raw "stated in" Q-identifier for the this template
citeParams['q'][i18n['cite']['q'][p.aliasesP.statedIn]] = self:getReferenceDetail(statement.snaks, p.aliasesP.statedIn, true) -- raw = true
useCite = citeQ
useParams = citeParams['q']
end
if useCite and useParams then
-- if this module is being substituted then build a regular template call, otherwise expand the template
if mw.isSubsting() then
for i, v in pairs(useParams) do
value = value .. "|" .. i .. "=" .. v
end
value = "{{" .. useCite .. value .. "}}"
else
value = mw.getCurrentFrame():expandTemplate{title=useCite, args=useParams}
end
-- (3) else, do some default rendering of name-value pairs, but only if at least "stated in", "reference URL" or "title" is present
elseif params[p.aliasesP.statedIn] or params[p.aliasesP.referenceURL] or params[p.aliasesP.title] then
citeParams['default'] = {}
-- start by adding authors up front
if params[p.aliasesP.author] and #params[p.aliasesP.author] > 0 then
citeParams['default'][#citeParams['default'] + 1] = table.concat(params[p.aliasesP.author], " & ")
end
-- combine "reference URL" and "title" into one link if both are present
if params[p.aliasesP.referenceURL] and params[p.aliasesP.title] then
citeParams['default'][#citeParams['default'] + 1] = '[' .. params[p.aliasesP.referenceURL][1] .. ' "' .. params[p.aliasesP.title][1] .. '"]'
elseif params[p.aliasesP.referenceURL] then
citeParams['default'][#citeParams['default'] + 1] = params[p.aliasesP.referenceURL][1]
elseif params[p.aliasesP.title] then
citeParams['default'][#citeParams['default'] + 1] = '"' .. params[p.aliasesP.title][1] .. '"'
end
-- then add "stated in"
if params[p.aliasesP.statedIn] then
citeParams['default'][#citeParams['default'] + 1] = "''" .. params[p.aliasesP.statedIn][1] .. "''"
end
-- remove previously added parameters so that they won't be added a second time
params[p.aliasesP.author] = nil
params[p.aliasesP.referenceURL] = nil
params[p.aliasesP.title] = nil
params[p.aliasesP.statedIn] = nil
-- add the rest of the parameters
for i, v in pairs(params) do
i = self.conf:getLabel(i)
if i ~= "" then
citeParams['default'][#citeParams['default'] + 1] = i .. ": " .. v[1]
end
end
value = table.concat(citeParams['default'], "; ")
if value ~= "" then
value = value .. "."
end
end
if value ~= "" then
value = {value} -- create one value object
if not self.rawValue then
-- this should become a <ref> tag, so safe the reference's hash for later
value.refHash = statement.hash
end
ref = {value} -- wrap the value object in an array
end
end
return ref
end
-- gets a detail of one particular type for a reference
function State:getReferenceDetail(snaks, dType, raw, link, anyLang)
local switchLang = anyLang
local value = nil
if not snaks[dType] then
return nil
end
-- if anyLang, first try the local language and otherwise any language
repeat
for i, v in ipairs(snaks[dType]) do
value = self.conf:getValue(v, raw, link, false, anyLang and not switchLang, false, true) -- noSpecial = true
if value then
break
end
end
if value or not anyLang then
break
end
switchLang = not switchLang
until anyLang and switchLang
return value
end
-- gets the details of one particular type for a reference
function State:getReferenceDetails(snaks, dType, raw, link, anyLang)
local values = {}
if not snaks[dType] then
return {}
end
for i, v in ipairs(snaks[dType]) do
-- if nil is returned then it will not be added to the table
values[#values + 1] = self.conf:getValue(v, raw, link, false, anyLang, false, true) -- noSpecial = true
end
return values
end
-- level 1 hook
function State:getAlias(object)
local value = object.value
local title = nil
if value and self.linked then
if self.conf.entityID:sub(1,1) == "Q" then
title = mw.wikibase.sitelink(self.conf.entityID)
elseif self.conf.entityID:sub(1,1) == "P" then
title = "d:Property:" .. self.conf.entityID
end
if title then
value = buildWikilink(title, value)
end
end
value = {value} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
-- level 1 hook
function State:getBadge(value)
value = self.conf:getLabel(value, self.rawValue, self.linked, self.shortName)
if value == "" then
value = nil
end
value = {value} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
function State:callHook(param, hooks, statement, result)
local valuesArray, refHash
-- call a parameter's hook if it has been defined and if it has not been called before
if not result[param] and hooks[param] then
valuesArray = self[hooks[param]](self, statement, param, result, hooks) -- array with value objects
-- add to the result
if #valuesArray > 0 then
result[param] = valuesArray
result.count = result.count + 1
else
result[param] = {} -- an empty array to indicate that we've tried this hook already
return true -- miss == true
end
end
return false
end
-- iterate through claims, claim's qualifiers or claim's references to collect values
function State:iterate(statements, hooks, matchHook)
matchHook = matchHook or alwaysTrue
local matches = false
local rankPos = nil
local result, gotRequired
for i, v in ipairs(statements) do
-- rankPos will be nil for non-claim statements (e.g. qualifiers, references, etc.)
matches, rankPos = matchHook(self, v)
if matches then
result = {count = 0} -- collection of arrays with value objects
local function walk(formatTable)
local miss
for i2, v2 in pairs(formatTable.req) do
-- call a hook, adding its return value to the result
miss = self:callHook(i2, hooks, v, result)
if miss then
-- we miss a required value for this level, so return false
return false
end
if result.count == hooks.count then
-- we're done if all hooks have been called;
-- returning at this point breaks the loop
return true
end
end
for i2, v2 in ipairs(formatTable) do
if result.count == hooks.count then
-- we're done if all hooks have been called;
-- returning at this point prevents further childs from being processed
return true
end
if v2.child then
walk(v2.child)
end
end
return true
end
gotRequired = walk(self.parsedFormat)
-- only append the result if we got values for all required parameters on the root level
if gotRequired then
-- if we have a rankPos (only with matchHook() for complete claims), then update the foundRank
if rankPos and self.conf.foundRank > rankPos then
self.conf.foundRank = rankPos
end
-- append the result
self.results[#self.results + 1] = result
-- break if we only need a single value
if self.singleValue then
break
end
end
end
end
return self:out()
end
function extractEntityFromInput(id, allowOmitPropPrefix)
if id:sub(1,1):upper() == "Q" then
return id:upper() -- entity ID of an item was given
elseif id:sub(1,9):lower() == "property:" then
return replaceAlias(mw.text.trim(id:sub(10))):upper() -- entity ID of a property was given
elseif allowOmitPropPrefix and id ~= "" then
return replaceAlias(id):upper() -- could be an entity ID of a property without "Property:" prefix
else
return nil
end
end
function extractEntityFromArgs(args, nextIndex, allowOmitPropPrefix)
local id, eidArg
if args[nextIndex] then
args[nextIndex] = mw.text.trim(args[nextIndex])
else
args[nextIndex] = ""
end
id = extractEntityFromInput(args[nextIndex], allowOmitPropPrefix)
eidArg = args[p.args.eid]
if id then
return id, nextIndex + 1
elseif eidArg then
return extractEntityFromInput(eidArg, true), nextIndex -- if no positional id was found but eid was given, use eid without a default
else
return mw.wikibase.getEntityIdForCurrentPage(), nextIndex -- by default, use item-entity connected to current page
end
end
function claimCommand(args, funcName)
local _ = Config.new()
_:processFlagOrCommand(funcName) -- process first command (== function name)
local parsedFormat, formatParams, claims, value
local hooks = {count = 0}
local nextIndex = 1
-- process flags and commands
while _:processFlagOrCommand(args[nextIndex]) do
nextIndex = nextIndex + 1
end
_.entityID, nextIndex = extractEntityFromArgs(args, nextIndex, false)
-- if eid was explicitly set to empty, then this returns an empty string
if _.entityID == nil then
return ""
end
_.entity = mw.wikibase.getEntity(_.entityID)
_.propertyID = replaceAlias(args[nextIndex]):upper()
nextIndex = nextIndex + 1
if _.states.qualifiersCount > 0 then
-- do further processing if "qualifier(s)" command was given
if #args - nextIndex + 1 > _.states.qualifiersCount then
-- claim ID or literal value has been given
_.propertyValue = mw.text.trim(args[nextIndex])
nextIndex = nextIndex + 1
end
for i = 1, _.states.qualifiersCount do
-- check if given qualifier ID is an alias and add it
_.qualifierIDs[parameters.qualifier..i] = replaceAlias(mw.text.trim(args[nextIndex] or "")):upper()
nextIndex = nextIndex + 1
end
elseif _.states[parameters.reference] then
-- do further processing if "reference(s)" command was given
if args[nextIndex] then
_.propertyValue = mw.text.trim(args[nextIndex])
end
-- not incrementing nextIndex because it is never used after this
end
-- check for special property value 'somevalue' or 'novalue'
if _.propertyValue then
_.propertyValue = replaceSpecialChars(_.propertyValue)
if _.propertyValue ~= "" and mw.text.trim(_.propertyValue) == "" then
_.propertyValue = " " -- single space represents 'somevalue', whereas empty string represents 'novalue'
else
_.propertyValue = mw.text.trim(_.propertyValue)
end
end
-- parse the desired format, or choose an appropriate format
if args["format"] then
parsedFormat, formatParams = parseFormat(args["format"])
elseif _.states.qualifiersCount > 0 then -- "qualifier(s)" command given
if _.states[parameters.property] then -- "propert(y|ies)" command given
parsedFormat, formatParams = parseFormat(formats.propertyWithQualifier)
else
parsedFormat, formatParams = parseFormat(formats.qualifier)
end
elseif _.states[parameters.property] then -- "propert(y|ies)" command given
parsedFormat, formatParams = parseFormat(formats.property)
else -- "reference(s)" command given
parsedFormat, formatParams = parseFormat(formats.reference)
end
-- if a "qualifier(s)" command and no "propert(y|ies)" command has been given, make the movable separator a semicolon
if _.states.qualifiersCount > 0 and not _.states[parameters.property] then
_.separators["sep"..parameters.separator][1] = {";"}
end
-- if only "reference(s)" has been given, set the default separator to none (except when raw)
if _.states[parameters.reference] and not _.states[parameters.property] and _.states.qualifiersCount == 0
and not _.states[parameters.reference].rawValue then
_.separators["sep"][1] = nil
end
-- if exactly one "qualifier(s)" command has been given, make "sep%q" point to "sep%q1" to make them equivalent
if _.states.qualifiersCount == 1 then
_.separators["sep"..parameters.qualifier] = _.separators["sep"..parameters.qualifier.."1"]
end
-- process overridden separator values;
-- must come AFTER tweaking the default separators
_:processSeparators(args)
-- define the hooks that should be called (getProperty, getQualifiers, getReferences);
-- only define a hook if both its command ("propert(y|ies)", "reference(s)", "qualifier(s)") and its parameter ("%p", "%r", "%q1", "%q2", "%q3") have been given
for i, v in pairs(_.states) do
-- e.g. 'formatParams["%q1"] or formatParams["%q"]' to define hook even if "%q1" was not defined to be able to build a complete value for "%q"
if formatParams[i] or formatParams[i:sub(1, 2)] then
hooks[i] = getHookName(i, 1)
hooks.count = hooks.count + 1
end
end
-- the "%q" parameter is not attached to a state, but is a collection of the results of multiple states (attached to "%q1", "%q2", "%q3", ...);
-- so if this parameter is given then this hook must be defined separately, but only if at least one "qualifier(s)" command has been given
if formatParams[parameters.qualifier] and _.states.qualifiersCount > 0 then
hooks[parameters.qualifier] = getHookName(parameters.qualifier, 1)
hooks.count = hooks.count + 1
end
-- create a state for "properties" if it doesn't exist yet, which will be used as a base configuration for each claim iteration;
-- must come AFTER defining the hooks
if not _.states[parameters.property] then
_.states[parameters.property] = State.new(_)
-- if the "single" flag has been given then this state should be equivalent to "property" (singular)
if _.singleClaim then
_.states[parameters.property].singleValue = true
end
end
-- if the "sourced" flag has been given then create a state for "reference" if it doesn't exist yet, using default values,
-- which must exist in order to be able to determine if a claim has any references;
-- must come AFTER defining the hooks
if _.sourcedOnly and not _.states[parameters.reference] then
_:processFlagOrCommand(p.claimCommands.reference) -- use singular "reference" to minimize overhead
end
-- set the parsed format and the separators (and optional punctuation mark);
-- must come AFTER creating the additonal states
_:setFormatAndSeparators(_.states[parameters.property], parsedFormat)
-- process qualifier matching values, analogous to _.propertyValue
for i, v in pairs(args) do
i = tostring(i)
if i:match('^[Pp]%d+$') or p.aliasesP[i] then
v = replaceSpecialChars(v)
-- check for special qualifier value 'somevalue'
if v ~= "" and mw.text.trim(v) == "" then
v = " " -- single space represents 'somevalue'
end
_.qualifierIDsAndValues[replaceAlias(i):upper()] = v
end
end
if _.entity and _.entity.claims then claims = _.entity.claims[_.propertyID] end
if claims then
-- first sort the claims on rank to pre-define the order of output (preferred first, then normal, then deprecated)
claims = sortOnRank(claims)
-- then iterate through the claims to collect values
value = _:concatValues(_.states[parameters.property]:iterate(claims, hooks, State.claimMatches)) -- pass property state with level 1 hooks and matchHook
-- if desired, add a clickable icon that may be used to edit the returned values on Wikidata
if _.editable and value ~= "" then
value = value .. _:getEditIcon()
end
return value
else
return ""
end
end
function generalCommand(args, funcName)
local _ = Config.new()
_.curState = State.new(_)
local value = nil
local nextIndex = 1
while _:processFlag(args[nextIndex]) do
nextIndex = nextIndex + 1
end
_.entityID, nextIndex = extractEntityFromArgs(args, nextIndex, true)
-- if eid was explicitly set to empty, then this returns an empty string
if _.entityID == nil then
return ""
end
-- serve according to the given command
if funcName == p.generalCommands.label then
value = _:getLabel(_.entityID, _.curState.rawValue, _.curState.linked, _.curState.shortName)
elseif funcName == p.generalCommands.title then
_.inSitelinks = true
if _.entityID:sub(1,1) == "Q" then
value = mw.wikibase.sitelink(_.entityID)
end
if _.curState.linked and value then
value = buildWikilink(value)
end
else
local parsedFormat, formatParams
local hooks = {count = 0}
if funcName == p.generalCommands.alias or funcName == p.generalCommands.badge then
_.curState.singleValue = true
end
_.entity = mw.wikibase.getEntity(_.entityID)
if funcName == p.generalCommands.alias or funcName == p.generalCommands.aliases then
local aliases
-- parse the desired format, or parse the default aliases format
if args["format"] then
parsedFormat, formatParams = parseFormat(args["format"])
else
parsedFormat, formatParams = parseFormat(formats.alias)
end
-- process overridden separator values;
-- must come AFTER tweaking the default separators
_:processSeparators(args)
-- define the hook that should be called (getAlias);
-- only define the hook if the parameter ("%a") has been given
if formatParams[parameters.alias] then
hooks[parameters.alias] = getHookName(parameters.alias, 1)
hooks.count = hooks.count + 1
end
-- set the parsed format and the separators (and optional punctuation mark)
_:setFormatAndSeparators(_.curState, parsedFormat)
if _.entity and _.entity.aliases then aliases = _.entity.aliases[_.langCode] end
if aliases then
value = _:concatValues(_.curState:iterate(aliases, hooks))
end
elseif funcName == p.generalCommands.badge or funcName == p.generalCommands.badges then
_.inSitelinks = true
local badges
-- parse the desired format, or parse the default aliases format
if args["format"] then
parsedFormat, formatParams = parseFormat(args["format"])
else
parsedFormat, formatParams = parseFormat(formats.badge)
end
-- process overridden separator values;
-- must come AFTER tweaking the default separators
_:processSeparators(args)
-- define the hook that should be called (getBadge);
-- only define the hook if the parameter ("%b") has been given
if formatParams[parameters.badge] then
hooks[parameters.badge] = getHookName(parameters.badge, 1)
hooks.count = hooks.count + 1
end
-- set the parsed format and the separators (and optional punctuation mark)
_:setFormatAndSeparators(_.curState, parsedFormat)
if _.entity and _.entity.sitelinks and _.entity.sitelinks[_.siteID] then badges = _.entity.sitelinks[_.siteID].badges end
if badges then
value = _:concatValues(_.curState:iterate(badges, hooks))
end
end
end
value = value or ""
if _.editable and value ~= "" then
-- if desired, add a clickable icon that may be used to edit the returned value on Wikidata
value = value .. _:getEditIcon()
end
return value
end
-- modules that include this module should call the functions with an underscore prepended, e.g.: p._property(args)
function establishCommands(commandList, commandFunc)
for commandIndex, commandName in pairs(commandList) do
local function wikitextWrapper(frame)
loadSubmodules(frame)
return commandFunc(copyTable(frame.args), commandName)
end
p[commandName] = wikitextWrapper
local function luaWrapper(args)
loadSubmodules()
return commandFunc(args, commandName)
end
p["_" .. commandName] = luaWrapper
end
end
establishCommands(p.claimCommands, claimCommand)
establishCommands(p.generalCommands, generalCommand)
-- main function that is supposed to be used by wrapper templates
function p.main(frame)
local f, args, i, v
loadSubmodules(frame)
-- get the parent frame to take the arguments that were passed to the wrapper template
frame = frame:getParent() or frame
if not frame.args[1] then
throwError("no-function-specified")
end
f = mw.text.trim(frame.args[1])
if f == "main" then
throwError("main-called-twice")
end
assert(p["_"..f], errorText('no-such-function', f))
-- copy arguments from immutable to mutable table
args = copyTable(frame.args)
-- remove the function name from the list
table.remove(args, 1)
return p["_"..f](args)
end
return p