ढाँचा:Height/doc
 | This is a documentation subpage for ढाँचा:Height. It contains usage information, categories and other content that is not part of the original ढाँचा page. |
Instructions
सम्पादन- The template is intended for conversion of heights specified in either feet and inches, or metric units (centimetres or metres). Metric units are converted to feet and inches, and feet and inches are converted to metres, or optionally to centimetres.
- As this template is intended for use in infoboxes, the units on both sides of the conversion are abbreviated by default. When using this template outside of infoboxes, use the abbr parameter, which can take values of yes (default; both sides of the conversion are abbreviated), no (both sides of the conversion are spelled out), or mos (WP:MOSNUM-compliant format, where the units being converted are spelled out and the units of the converted values are abbreviated).
- For conversion of metric units to feet/inches, the frac parameter can be specified to either show the output inches as decimals (frac=10) or as a vulgar fraction (frac=desired denominator; the default is 2 for halves). The frac parameter is ignored for conversion of feet/inches to meters.
- When decimal output is used, the default precision is 1 for meters-to-feet/inches conversion and 2 for feet/inches-to-meters conversion, but it can be overridden by specifying a different figure using the precision parameter (see example below). The precision parameter is ignored when frac is set to anything but 10.
- wiki parameter specifies whether the names of the units should be wikified or not and can take values of either yes or no. The default value is no.
- Use
|out=cmwith input values in feet and inches to output the conversion as centimetres.
Code
सम्पादन| Code | Result |
|---|---|
| {{height|m=1.77|precision=0}} | 1.77 m (5 ft 10 in) |
| {{height|cm=177|precision=0}} | 177 cm (5 ft 10 in) |
| {{height|cm=177}} | 177 cm (5 ft 9 1⁄2 in) |
| {{height|cm=177|frac=16}} | 177 cm (5 ft 9 11⁄16 in) |
| {{height|ft=6}} | 6 ft 0 in (1.83 m) |
| {{height|ft=6|out=cm}} | 6 ft 0 in (183 cm) |
| {{height|cm=184}} | 184 cm (6 ft 1⁄2 in) |
| {{height|ft=6|in=1}} | 6 ft 1 in (1.85 m) |
| {{height|ft=6|in=1|out=cm}} | 6 ft 1 in (185 cm) |
| {{height|ft=6|in=1|precision=1}} | 6 ft 1 in (1.9 m) |
| {{height|ft=6|in=1|precision=-1|out=cm}} | 6 ft 1 in (190 cm) |
| {{height|ft=5|in=7+1/2}} | 5 ft 7 1⁄2 in (1.71 m) |
| {{height|ft=5|in=7+1/2|out=cm}} | 5 ft 7 1⁄2 in (171 cm) |
| {{height|ft=5|in=7+1/2|precision=1}} | 5 ft 7 1⁄2 in (1.7 m) |
| {{height|ft=5|in=7+1/2|precision=-1|out=cm}} | 5 ft 7 1⁄2 in (170 cm) |
| {{height|in=10}} | 0 ft 10 in (0.25 m) |
| {{height|in=10|out=cm}} | 0 ft 10 in (25 cm) |
| {{height|ft=6|in=2|abbr=mos}} | 6 feet 2 inches (1.88 m) |
| {{height|ft=6|in=2|abbr=mos|out=cm}} | 6 feet 2 inches (188 cm) |
| {{height|ft=6|in=2}} | 6 ft 2 in (1.88 m) |
| {{height|ft=6|in=2|out=cm}} | 6 ft 2 in (188 cm) |
| {{height|ft=5|in=7+1/2|precision=3}} | 5 ft 7 1⁄2 in (1.715 m) |
| {{height|ft=5|in=7+1/2|precision=1|out=cm}} | 5 ft 7 1⁄2 in (171.5 cm) |
| {{height|cm=200|in=2|precision=0}} | Error: please specify height using only one type of units |
| {{height|cm=177|frac=0}} | 177 cm (5 ft 9.7 in)* |
- m is for meters
- cm is for centimetres
- ft is for feet
- in is for inches
Template data
सम्पादनTemplateData for Height
The template is intended for conversion of heights specified in either meters or in feet and inches.
| मापदण्ड | विवरण | प्रकार | स्थिति | |
|---|---|---|---|---|
| Meters | m meter meters metre metres | The height in meters. Do not use if feet and inches are specified. | सङ्ख्या | वैकल्पिक |
| Centimeters | cm centimeter centimeters centimetre centimetres | The height in centimeters. Do not use if feet and inches are specified. | सङ्ख्या | वैकल्पिक |
| Feet | ft foot feet | The feet part of the height in feet and inches. Do not use if centimeters are specified. | सङ्ख्या | वैकल्पिक |
| Inches | in inch inches | The inches part of the height in feet and inches (optional). Do not use if centimeters are specified. Fractions are supported in the form u+n/d. | सङ्ख्या | वैकल्पिक |
| Precision of converted value | precision | The amount of decimal places to display the converted value to. Defaults to 2 for feet and inches to meters and to 1 for meters/centimeters to feet and inches. | सङ्ख्या | वैकल्पिक |
| Fraction denominator | frac | Shows result as a fraction. The number in this parameter is the denominator of the fraction. Used only for meters/centimeters to feet and inches. Set to "10" for decimals. Defaults to 2 (halves). | सङ्ख्या | वैकल्पिक |
| Abbreviation style | abbr | Changes abbreviation style. Set to "yes" for all units to be abbreviated (default), "no" for all to be spelled out, or "mos" for the units being converted to be spelled out and the converted units to be abbreviated. | String | वैकल्पिक |
| Unit linking | wiki | Changes whether units are linked. Set to "no" to not link units (default) or "yes" to link units. | String | वैकल्पिक |
| Output format | out | Changes output format of conversion. Set to "cm" with input values in feet and inches to output the conversion as centimetres. No other options currently exist and the template ignores anything other than "cm". | String | वैकल्पिक |
See also
सम्पादन- {{convert}}
- {{convert|1.82|m|ftin|frac=4|abbr=on}} → 1.82 m (5 ft 11 3⁄4 in)
- {{convert|182|cm|ftin|frac=4|abbr=on}} → 182 cm (5 ft 11 3⁄4 in)
- {{convert|5|ft|11+3/4|in|m|2|abbr=on}} → 5 ft 11 3⁄4 in (1.82 m)
- {{convert|5|ft|11+3/4|in|cm|0|abbr=on}} → 5 ft 11 3⁄4 in (182 cm)